- TOSIZE.es
- Do it yourself
- DIY Projects
Pensil 11 speaker conversion with plywood (custom size), by Peter
Create this project yourself with sheet material cut to size by TOSIZE.es!
Peter
Above average
1 minuut
Description by Peter
Pensil 11 speaker (modified size) for Mark Audio Pluvia 11 full-range driver. This speaker is 94.0 cm tall and suitable for a single driver.
How I Completed This Project
The project is based on an existing design from Mark Audio, which can be found on the Pluvia 11 driver page. I adjusted the dimensions myself because I wanted to build a small floor-standing speaker. All boards were cut to size, and for reinforcement, I used 3 boards per speaker as partitions. These are placed at uneven distances from each other to counteract internal resonances. The entire assembly was glued together using wood glue and secured with frame clamps. The base plate is removable to allow for the installation and adjustment of internal wiring.
Dimensions of My DIY Project
94.0 cm x 33.0 cm x 21.0 cm
Tip! Also check out our handy DIY tips!
How next?
Want to make this DIY project? Check out Peter's saw list and complete your order easily.
200,44 €
All materials used
View all sheet materials