Rollable formwork for the storage of roller skates, by Joris

Related projects
Extensive range of edgebanding
New!
Extensive range of edgebanding
Logo TOSIZE.es
View the product range

Create this project yourself with sheet material cut to size by TOSIZE.es!

Joris

Joris

NL

Above average

2 minutes

Description

A storage module on wheels for the storage of roller skates, which are used during events and workshops. I designed and built this piece of furniture myself. The skates are positioned at a slight angle of 5 degrees and are held in place by a small beam.

The cabinets are connected to each other with three hinges. The hinges allow the cabinet to open like a flight case, allowing skaters to grab their roller skates and swap them with their shoes. When the cupboard is closed, the skates can be easily transported.

Work description: how did you realize your project


  1. The underlayment wood first completely sanded with coarse and then fine sandpaper.

  2. After sanding and cleaning, I put all the planks together and made separate modules. First all the planks and later the housing.

  3. I marked all the screw holes with a pencil.


The housing is also glued in place, but the planks are only screwed in place so that they can be repaired when necessary. I chiselled the hinges out of the long sides so that the cabinet can be fully opened.

Finally, I screwed the wheels underneath and then lacquered everything so that the cabinet is firmly put together.

Final size: What are the external dimensions?

Closed: height 165.0 cm width 90.0 cm depth 80.0 cm
Open: height 165.0 cm width 180.0 cm depth 40.0 cm

p>

Tip! Also check out our handy DIY tips!

What now?

Want to make this DIY project? Check out Joris's saw list and complete your order easily.

261,06 €


All materials used

Explanation

View all sheet materials